Woodoc 45 Water-Borne Tile and Cement Sealer

Woodoc 45 Water-Borne Tile and Cement Sealer

A water-borne tile and cement sealer to protect unglazed, porous substrates against water ingress, weathering, pollution and general wear.


Water-Borne sealer for UNTREATED Tiles and Cement.


Any of the Woodoc COLOURcan be added to this CLEAR product to tint it.  Please go to the COLOURS section to see our colour selection and examples.

  • Typical Application

    Ensure all substrates are completely dry or cured before application.

    Porous substrates such as:


    • Natural Tiles
    • Stone
    • Brick (Not suitable for face-bricks)
    • Cement
    • Concrete
    • Ornamental pavers
  • Features

    • Strong, durable surface finish
    • Water-repellent
    • Stain- and oil-resistant
    • Easy to use and apply 
    • Easy to clean brushes and equipment with water before they dry
    • Environment-friendly, non-toxic
    • Suitable for walking surfaces


    To tint, only Woodoc colours can be used with Woodoc 45


  • Coverage

    • 5 - 12 square metres per litre, depending on porosity of substrate.

How Woodoc Supercedes All Coating Alternatives


Binds with the wood: Because Woodoc penetrates into the wood it binds with it, becoming part of the wood’s surface.


Woodoc works in harmony with the wood allowing it to breathe naturally just like bark, helping to combat ageing and deterioration.


Doesn’t Crack – Biodegrades: The Woodoc coating doesn’t get brittle with age but stays in harmony with the wood and biodegrades at the end of its cycle. 


Easy Maintenance and Re-sealing: All that a Woodoc-treated surface requires when renovating is:



*Solvent Based Sealers: to be cleaned down with steel wool and mineral turpentine, then resealed with appropriate sealer. Remove dust and loose particles. 


*Water-Borne Sealers: to be sanded lightly with fine sandpaper to key the surface and ensure proper binding between the old and new layers. Remove dust and loose particles.