Woodoc 20 Interior Polyurethane Sealer

Woodoc 20 Interior Polyurethane Sealer

A polished, grain filled finish. Most suitable for high traffic woodwork like door frames, tables and counter tops.


Any of the Woodoc COLOURcan be added to this CLEAR product to tint it.  Please go to the COLOURS section to see our colour selection and examples.

  • Typical Application

    • Wooden furniture
    • Skirting boards
    • Banisters
    • Doors, door frames
    • Window frames, sills
    • Kitchen counters, cupboards
    • Wooden ceilings
  • Features

    • Glossy, grain filled finish
    • Easy application
    • Deep penetrates to nourish wood & enhance the grain
    • Water & alcohol resistant
    • Heat & cold resistant
    • Scratch & mark resistant
    • Non-toxic when dry
  • Coverage

    • First coat 10-12 square metres per litre.
    • Subsequent coats 12- 14 square metres per litre.
    • 3 coats are the advised application 3,3 square metres per litre.
  • Colour Explained

    Woodoc Colours are formulated to be added to clear Woodoc Water-Borne and Solvent Based Sealers ensuring easy and controlled application. The Woodoc Colours range of Brights, as well as fashion- and wood shades provide endless décor possibilities.


    For transparent colour decoration on Pine furniture, Wooden floors, Wooden toys, Wooden Patio Furniture, Garage Doors and Gates. Woodoc Colours can also be used on darker woods.


    The colours come in a pre-measured bottles.  You apply them by mixing them into a selected sealer for uniform application.  The intensity of colour can be controlled. Please refer to instructions on the bottles or download the Usage and application instructions.


    Note: Because the natural colour and absorbency of wood differ, the final appearance of Woodoc Colours can vary on application.


    For more information please visit out COLOUR section.

How Woodoc Supercedes All Coating Alternatives


Binds with the wood: Because Woodoc penetrates into the wood it binds with it, becoming part of the wood’s surface.


Woodoc works in harmony with the wood allowing it to breathe naturally just like bark, helping to combat ageing and deterioration.


Doesn’t Crack – Biodegrades: The Woodoc coating doesn’t get brittle with age but stays in harmony with the wood and biodegrades at the end of its cycle. 


Easy Maintenance and Re-sealing: All that a Woodoc-treated surface requires when renovating is:



*Solvent Based Sealers: to be cleaned down with steel wool and mineral turpentine, then resealed with appropriate sealer. Remove dust and loose particles. 


*Water-Borne Sealers: to be sanded lightly with fine sandpaper to key the surface and ensure proper binding between the old and new layers. Remove dust and loose particles.